Продолжительность и выпуклость для измерения риска облигаций

Что такое продолжительность и выпуклость?

Продолжительность и выпуклость — два инструмента, которые используются для управления рисками инвестиций с фиксированным доходом. Дюрация измеряет чувствительность облигации к изменениям процентной ставки. Выпуклость связана с взаимодействием между ценой облигации и ее доходностью при изменении процентных ставок.

В случае купонных облигаций инвесторы полагаются на показатель, известный как дюрация, для измерения чувствительности цены облигации к изменениям процентных ставок. Поскольку купонная облигация совершает серию выплат в течение срока ее существования, инвесторам с фиксированным доходом нужны способы измерения среднего срока погашения обещанного денежного потока по облигации, чтобы служить сводной статистикой эффективного срока погашения облигации. Это достигается за счет дюрации, позволяя инвесторам с фиксированным доходом более эффективно оценивать неопределенность при управлении своими портфелями.

Ключевые выводы

  • В случае купонных облигаций инвесторы полагаются на показатель, известный как «дюрация», для измерения чувствительности цены облигации к изменениям процентных ставок.
  • Используя инструмент управления пробелами, банки могут уравнять дюрации активов и пассивов, эффективно защищая свою общую позицию от колебаний процентных ставок.

Срок действия облигации

В 1938 году канадский экономист Фредерик Робертсон Маколей назвал концепцию эффективного срока погашения «дюрацией» облигации. При этом он предложил рассчитывать эту дюрацию как средневзвешенное значение времени до погашения каждого купона или выплаты основного долга., сделанная облигацией. Формула длительности Маколея выглядит следующим образом:

Duration in Fixed Income Management

Duration is critical to managing fixed-income portfolios, for the following reasons:

  1. It’s a simple summary statistic of the effective average maturity of a portfolio.
  2. It’s an essential tool in immunizing portfolios from interest rate risk.
  3. It estimates the interest rate sensitivity of a portfolio.

The duration metric carries the following properties:

  • The duration of a zero-coupon bond equals time to maturity.
  • Holding maturity constant, a bond’s duration is lower when the coupon rate is higher, because of the impact of early higher coupon payments.
  • Holding the coupon rate constant, a bond’s duration generally increases with time to maturity. But there are exceptions, as with instruments such as deep-discount bonds, where the duration may fall with increases in maturity timetables.
  • Holding other factors constant, the duration of coupon bonds is higher when the bonds’ yields to maturity are lower. However, for zero-coupon bonds, duration equals time to maturity, regardless of the yield to maturity.
  • The duration of level perpetuity is (1 + y) / y. For example, at a 10% yield, the duration of perpetuity that pays $100 annually will equal 1.10 /.10 = 11 years. However, at an 8% yield, it will equal 1.08 /.08 = 13.5 years. This principle makes it obvious that maturity and duration may differ widely. Case in point: the maturity of the perpetuity is infinite, while the duration of the instrument at a 10% yield is only 11 years. The present-value-weighted cash flow early on in the life of the perpetuity dominates the duration computation.

Duration for Gap Management

Many banks exhibit mismatches between asset and liability maturities. Bank liabilities, which are primarily the deposits owed to customers, are generally short-term in nature, with low duration statistics. By contrast, a bank’s assets mainly comprise outstanding commercial and consumer loans or mortgages. These assets tend to be of longer duration, and their values are more sensitive to interest rate fluctuations. In periods when interest rates spike unexpectedly, banks may suffer drastic decreases in net worth, if their assets drop further in value than their liabilities.

A technique called gap management is a widely used risk management tool, where banks attempt to limit the «gap» between asset and liability durations. Gap management heavily relies on adjustable-rate mortgages (ARMs), as key components in reducing the duration of bank-asset portfolios. Unlike conventional mortgages, ARMs don’t decline in value when market rates increase, because the rates they pay are tied to the current interest rate.

On the other side of the balance sheet, the introduction of longer-term bank certificates of deposit (CDs) with fixed terms to maturity, serve to lengthen the duration of bank liabilities, likewise contributing to the reduction of the duration gap.

Understanding Gap Management

Banks employ gap management to equate the durations of assets and liabilities, effectively immunizing their overall position from interest rate movements. In theory, a bank’s assets and liabilities are roughly equal in size. Therefore, if their durations are also equal, any change in interest rates will affect the value of assets and liabilities to the same degree, and interest rate changes would consequently have little or no final effect on net worth. Therefore, net worth immunization requires a portfolio duration, or gap, of zero.

Institutions with future fixed obligations, such as pension funds and insurance companies, differ from banks in that they operate with an eye towards future commitments. For example, pension funds are obligated to maintain sufficient funds to provide workers with a flow of income upon retirement. As interest rates fluctuate, so do the value of the assets held by the fund and the rate at which those assets generate income. Therefore, portfolio managers may wish to protect (immunize) the future accumulated value of the fund at some target date, against interest rate movements. In other words, immunization safeguards duration-matched assets and liabilities, so a bank can meet its obligations, regardless of interest rate movements.

Convexity in Fixed Income Management

Unfortunately, duration has limitations when used as a measure of interest rate sensitivity. While the statistic calculates a linear relationship between price and yield changes in bonds, in reality, the relationship between the changes in price and yield is convex.

In the image below, the curved line represents the change in prices, given a change in yields. The straight line, tangent to the curve, represents the estimated change in price, via the duration statistic. The shaded area reveals the difference between the duration estimate and the actual price movement. As indicated, the larger the change in interest rates, the larger the error in estimating the price change of the bond.

Convexity, a measure of the curvature of the changes in the price of a bond, in relation to changes in interest rates, addresses this error, by measuring the change in duration, as interest rates fluctuate. The formula is as follows:

C=d2(B(r))B∗d∗r2where:C=convexityB=the bond pricer=the interest rated=duration\begin{aligned} &C = \frac{d^2\left(B\left(r \right )\right)}{B*d*r^2} \\ &\textbf{where:}\\ &C = \text{convexity}\\ &B = \text{the bond price}\\ &r = \text{the interest rate}\\ &d = \text{duration}\\ \end{aligned}​C=B∗d∗r2

In general, the higher the coupon, the lower the convexity, because a 5% bond is more sensitive to interest rate changes than a 10% bond. Due to the call feature, callable bonds will display negative convexity if yields fall too low, meaning the duration will decrease when yields decrease. Zero-coupon bonds have the highest convexity, where relationships are only valid when the compared bonds have the same duration and yields to maturity. Pointedly: a high convexity bond is more sensitive to changes in interest rates and should consequently witness larger fluctuations in price when interest rates move.

The opposite is true of low convexity bonds, whose prices don’t fluctuate as much when interest rates change. When graphed on a two-dimensional plot, this relationship should generate a long-sloping U shape (hence, the term «convex»).

Low-coupon and zero-coupon bonds, which tend to have lower yields, show the highest interest rate volatility. In technical terms, this means that the adjustment to keep pace with the higher change in price after interest rate moves. Lower coupon rates lead to lower yields, and lower yields lead to higher degrees of convexity.

The Bottom Line

Ever-changing interest rates introduce uncertainty in fixed-income investing. Duration and convexity let investors quantify this uncertainty, helping them manage their fixed-income portfolios.